National Service Hotline:+86-13750353828Mr. FengUnderstand the operation rules of belt conveyor
When the belt conveyor stops running, press the stop button to block the total power supply after all the system stops. Please refer to the following for detailed operation.
1. Turn on the main power switch to check whether the power supply of the equipment is normal and whether the power indicator is on. Carry out the next operation after normal operation.
2. Turn on the power switch of each circuit. Under normal conditions, the equipment does not act, the running indicator of belt conveyor is not on, the power indicator of frequency converter and other equipment is on, and the display panel of frequency converter is normal (no fault code is displayed).
3. Start the electrical equipment in sequence according to the process flow, and start the next electrical equipment after the previous one is normal. In the operation of the belt conveyor, we must abide by the rules of the articles to be transported and the design capacity of the belt conveyor.
4. Secondly, it should be noted that all kinds of personnel should not touch the moving part of the belt conveyor, and non professional personnel should not touch electrical components and control buttons at will.
In the end, the belt conveyor can not open the rear stage of the frequency converter during the operation. If the maintenance needs to be determined, it must be carried out under the condition of stopping the frequency conversion operation, otherwise the frequency converter may be damaged. Source: Guangdong belt conveyorhttp://www.mebsp.com
-
07-02
Belt conveyor conveying speed is unfavorable use too fast
The quality of the delivery of materials or volume calculation; When transported into items, a number of delivery per hour to accounting. Transport belt conveyer delivery speed: progress speed transport ability to progress. In the ship to take for traction and length is larger, the delivery speed is increased. But high-speed belt conveyer to be attention to the problem of vibration and nois
-
07-02
Function of Guangdong bucket elevator in asphalt aggregate mixing
Asphalt mixing bucket elevator is a very important equipment in mixing. It is continuously discharged to the bucket type through the aggregate lifting of different scales of the dryer to improve the height of the vibrating screen gravel, stone grading standards, qualified stone particles to the asphalt mixing equipment, uniform mixing.Function of bucket elevator in asphalt aggregate mixingStone as
-
07-02
Guangdong bucket elevator fault analysis and Solutions
&Bucket elevator fault analysis and treatment planCause analysis and treatment of common problems of bucket elevator:1: hopper belt slippingBucket elevator is a kind of information about the use of conflicting torque between the belt and the elevator shaft of hopper head wheel. If the belt tension is insufficient, the hopper will lead to belt slip. At this time, the machine should be stopped immed
-
07-02
Causes of hopper falling of Guangdong bucket elevator
There are four reasons for the hopper falling of belt bucket elevator1. The direct cause of hopper falling and deformation is that too much material is fed into the machine frame and the lifting resistance is increased and the hopper is not running smoothly. At this time, the machine should be shut down immediately, the plug-in plate under the frame should be drawn out, the accumulated materials i